ETV330C/515C Sheeter

Description

The sheeter is operated by a touch display and available for the web widths 13" or 20". The sheeting is done by a guillotine cutter which is also suitable for cutting heavy materials. The sheeter easily adjusts to cutting by interval, length or print marks with a resolution of 0.004" and an approximate accuracy of +/- .006mm. The machine can be supplied with a rotating length slitting.

Specifications

  - Touch display setting of label quantity per sheet and other job information.
  - Unwind mandrel with separate motor.
  - Conveyor belt with setting of sheets per stack and total number.
  - Automatic register control adjusts for changes in the sheeter speed.
  - When the sheeter is switched off, all settings are preserved (battery backup).
  - Switch-over to inline operation (optional equipment).

Technical Specifications

  - Cutting accuracy approximation: 0.0006"
  - Maximum web width: 13.0" - 20.3"
  - Maximum sheet length: 393.7"
  - Minimum sheet length: 0.4"
  - Maximum unwind diameter (internal unwind section): 31.5"
  - Maximum roll weight, unwinding: 331 lbs
  - Maximum web speed: 90 fpm

The web speed is limited to a maximum 90 fpm and 14,000 sheets/hour and varies consequently according to the selected cutting length. The speed is typically 3,000-10,000 sheets/hour (subject to the job).

Dimensions

  - ETV330C (L x W x H): 31.5" x 36.6" x 57.9"
  - ETV515C (L x W x H): 31.5" x 44.1" x 57.9"
  - Including conveyor table (L x W x H): 71.7" x 36.6"/44.1" x 57.9"
  - Weight ETV330C: 474 lbs
  - Weight ETV515C: 584 lbs

Optional Equipment

  - Print mark reader for cutting by print marks
  - Web Guide Sensor ("clear on clear")
  - Length slitting knives (fixed) including holders (razor blade type, maximum 2 knives)
  - Length slitting knives (rotary top and bottom cutter), maximum 6 knives. (also for retrofitting)
  - Separate unwind section, maximum roll diameter 40".

Call GraphixOne today at 513-870-0512